3D Car Model - Future Car

To start my Future car I had to get some ideas and research  future cars, I found a few films that had really good concepts of what future cars would look like, I got some really good ideas from films like Total Recall, iRobot and minority report.

As my model car was an Audi I used the irobot Audi for my main design, getting rid of the wheels and having the car hovering. I also took the style from that car too but changed it to my own ideas. 

 I began Drawing out some blueprints for my future car by using the original Audi r8 blueprints, as i was designing loads of ideas came to me so i joted down loads of notes as I was designing. Below are my rough blueprints.

The cars shape didnt change to much but i made the car alot thicker and shorter to give it that future look, also made the car more aerodynamic for flying which also helps make the car look futuristic. I got the style of the hover devices from iRobot but i changed them to a rounded triangle shape and detached them so they can rock to give extra stability. I made the side panel into wings for when its flying and there are no exhaust but there are thrusters for the extra boost.  Another little change is the Audi logo, I just made the circles more triangular.

I then made these blueprints more simpler. (BELOW)

Looks alot more futuristic now.. These blueprints are not perfect but they will help me alot when I have to model it later.
I wanted to research into how the car would hover and fly and its purpose so i came up with different modes for the car.

The New Audi Hover Car

Specifications:

Manufacturer: AcGameart

Production: December 6^th 2088

Designer: Alex Curtis

Class: Hover Car

Body Style: 2 door coupé

Engine: Electric / Fuel Cells

Transmission: Automatic/Autopilot

: Manual- 12 speed

Dimensions:

Length: 4,508 mm (177.4in)

Width: 2,000mm (78.7in)

Height: 1,150mm (61in)

Modes:

Cruise Mode:

Cruise mode is the slowest mode and it is used for cruising around heavily populated areas as it is the safest way to travel, it is very stable and is driven is fully automatic and is set to autopilot as default. Cruise mode uses hardly any energy compared to the other modes. It only uses electric energy, not fuel cells, the hover wheels use mainly low air thrusters to hover.

Speed: 0-50 mph

Manual Mode:

In manual mode the autopilot is not set in default, this mode is used for higher altitudes and can reach faster speeds around urban and rural areas. Even at higher altitudes and faster speeds the vehicle is still very stable but uses a lot more energy for the engine to power the thrusters and auto – stability system, Active Power Stabilizer Suspension System

(the hover wheels auto adjust for stability) This mode uses electric energy and fuel cells. Manual mode is used to reach the high altitude routes and skyscraper parking.

Speed: 50-150 mph

Flight Mode:

Flight mode is the least safest mode and is totally forbidden in heavy populated areas like large cities. This mode is the least stable mode, when flight mode is activated wings protrude out the side of the vehicle that gives extra stability and two additional thrusters for extreme speeds. Also once activated the seats are automatically adjusted to tilt forward so the driver is sat like on The vehicle can't stay in flight mode for long as it uses so much energy with the two additional thrusters and the default thrusters which can reach full power.

Speed: 150 – 400 mph

I then thought maybe the blueprints wasn't enough to show my design so i decided to draw a digital drawing of the car to get a different perspective.

 
Then the modelling begins..

It was difficult at first, trying to edit the model i had already created but then things started to fall into place. here is the finished model.

I moved straight onto the texturing and couldn't decide what colours to make it so i made a few with different textures etc.. So thank you again for reading and supporting my blog, Here is my finished renders of the new HOVER CAR!!!!!